ANNOx CLD 700 EL ht Specifications
 

HOME

INDUSTRIAL

CLD 700 EL ht

CLD 700 EL ht Specifications

Automotive

Clean Room
Monitoring

Stack Emission
Monitoring

Nitrates
In Liquids

MEDICAL

ENVIRONMENTAL

AMMONIA

CONTACT


Measuring ranges: 0-10, 0-100, 0-1,000, 0-10,000 ppm
Minimum detectable concentration: 0.1 ppm
Noise at zero point (1 sigma): 0.05 ppm
Zero drift: none
Linearity (in range): 1% FS
Lagtime: 5 sec
Rise time (0-90%): 2-32 sec selectable (range dependent)
Temperature range: 10-40 C
Humidity tolerance: 5-95% rel. h
(non-condensing, ambient air and sample gas)
Quenching: for H2O: <0.75%/vol.-% H2O
for CO2: <0.15%/vol.-% CO2
Sample flow rate: 1.3 l/min
Dry air use (for Ogenerator): 0.55 l/min
Power required: 660 VA
(incl. membrane pump, bypass pump and ozone scrubber)
Supply voltage: 230 V/50 Hz, 115 V/60 Hz ( 10%)
Interface: RS 232 (standard)
Analogue output: selectable 1 V, 10 V, 20 mA, 4-20mA
600 ohms max.
Weight: 40 kg
Dimensions: height: 133 mm (5 1/4"; 3 HU),
with feet 158 mm (6 1/4")
width: 483 mm (19")
depth: 588 mm (23 1/8")
Delivery includes: Analyser CLD 700 EL, membrane vacuum pump,
ozone scrubber, bypass pump, power cables,
RS232 cable, tubing, manual, calibration certificate.


Sample Conditioning Requirements

Heated sample line & optional heated pre filter